The Maintenance Skill Of The Courtyard Lamp
Garden lights can be used as decorative items during the day, and by night, it will bring us light.
The main function of the courtyard lamp is to use the courtyard, the sidewalk, the small garden road, the activity area edge and so on to realize the illumination, facilitates the people to travel.
Garden lights are generally used in the residential areas, mainly to provide the lighting of district roads. The Courtyard lamp style is many, in the choice time mainly according to the community's architectural style to carry on the choice, the height is generally in 3-3.5 meters, Garden Lamp too high light easily affect the two-storey occupants of the rest, too short, lighting effect will be affected. Light rods are usually used for hot-dip galvanizing, wire cutting, courtyard lamp wall thickness from 1.5mm-3mm unequal, light source configuration can be energy-saving lamps, LED lights or metal halide lamps and so on, Garden Lamp specific can be configured according to user requirements.
Courtyard lights are a kind of outdoor lighting, usually refers to 6 meters below the outdoor road lighting, its main components by: light source, lamp, lamp rod, flange, base embedded Parts 5 parts, because the courtyard lamp has a variety, aesthetic and decorative features of the environment, Garden Lamp so also known as landscape garden lights. Mainly used in urban slow lanes, narrow lanes, residential areas, tourist attractions, parks, squares and other public places outside lighting, can extend people's outdoor activities time, Garden Lamp improve the safety of property.
Maintenance of the Courtyard lamp
1, should not hang on the lamp items, such as drying quilts.
2, frequent switch, will greatly reduce its service life, so use lamps to minimize the switch lamps;
3, in the use or cleaning found shade tilt, should be adjusted to maintain beauty;
4, in the adjustment of the lampshade, Garden Lamp pay attention to avoid the lamp in the three-fork support frame in the light reflected shadow;
5, according to the signs provided by the light source parameters in time to replace the aging lamp, found that both ends of the lamp red, the lamp black or dark, lamp light, should be replaced in a timely manner to prevent the ballast burnout and other unsafe phenomenon.
Cleaning of garden lights
1, landscape garden lighting generally more dust, Garden Lamp cleaning with a damp cloth to wipe can be, the movement to keep the same direction, do not rub back and forth, the strength to moderate, especially to the chandelier, wall lamp to be gentle.
2, clean the interior lighting, clean the bulb, the first to turn off the lights, wipe when the light can be removed individually wipe. If directly on the luminaire to clean, do not turn the light bulb clockwise direction, to avoid the lamp cap screwed too tight peeling.