The Courtyard Lamp Has The Function Of Directional Emission Light

Garden lights are generally used in the district, the main road to provide residential lighting. Garden lights style, in the choice of the main building area based on the selection of the district, the height is generally 3-3.5 meters, too high light easily affect the two-story tenants rest, too short, the lighting effect will be affected. Light pole is usually hot-dip galvanizing spray, line cutting, garden lamp poles wall thickness from 1.5mm-3mm range, the light source configuration can be energy-saving lamps, led lights or metal halide lights, etc., Requires configuration.

Garden lights are a kind of outdoor lighting, usually refers to the outdoor lighting below 6 meters, the main components from: light, lamps, poles, flanges, basic embedded parts 5 parts, Garden Lamp because the courtyard lamp With diversity, aesthetics with landscaping and decorative environment characteristics, it is also known as the landscape garden lights. Mainly used in urban slow lane, narrow lane, residential area, tourist attractions, parks, squares and other public places of outdoor lighting, Garden Lamp to extend people's outdoor activities time and improve the safety of property.

The Function and Characteristics of Lighting System in Garden Lamps. The biggest feature of the garden lights is the ability to orient the light, because the power type garden lights are almost always equipped with reflectors, and the efficiency of the installation of such reflectors are significantly higher than the efficiency of the reflector lamps. In addition, the efficiency of the self-reflector has been included in the inspection of the luminous efficiency of the garden lights. Garden Lamp The use of garden lights in the road lamps should be used as far as possible the use of directional light emitted from the characteristics of the garden lights.

Garden lights manufacturers to make the road lights in the courtyard lights were directly directed to the road according to the various areas of the road, this time re-use of the lamp reflector auxiliary light, Garden Lamp you can use to achieve a very reasonable road lighting integrated light distribution The

The selection of garden lights is introduced

(1) selection of light distribution with a reasonable light, lighting should be based on the function and space shape to determine the type of light distribution lamps.

(2) selection of efficient lighting. Under conditions that meet the requirements of glare restrictions, direct lighting and open lighting should be used for lighting that only meets visual functions.

(3) choose to facilitate the installation and maintenance, low operating costs of the lamps.

(4) In special places where there is a fire or explosion hazard and dust, humidity, vibration and corrosion, you should use lamps that meet the environmental requirements.

(5) lamps and other parts of the lamp with high temperature parts close to combustible materials, Garden Lamp should take insulation, heat and other fire protection measures.

(6) lighting fixtures should have complete optoelectronic parameters, Garden Lamp the performance should be consistent with the relevant provisions of the existing standards.

(7) The appearance of the lamp should be coordinated with the environment of the installation site.

(8) to consider the characteristics of light and building decoration requirements.

(9) Garden lights and street lights are not very different, mainly high, the thickness of the material and the difference between beauty, Garden Lamp street lamp material thicker, and higher, the appearance of the garden lights more beautiful.