Courtyard Light Is A Kind Of Outdoor Lighting

Garden lights are generally used in the residential areas, mainly to provide the lighting of district roads. The Courtyard lamp style is many, in the choice time mainly according to the community's architectural style to carry on the choice, the height is generally in 3-3.5 meters, Garden Lamp too high light easily affect the two-storey occupants of the rest, too short, lighting effect will be affected. Light rods are usually used for hot-dip galvanizing, wire cutting, courtyard lamp wall thickness from 1.5mm-3mm unequal, light source configuration can be energy-saving lamps, LED lights or metal halide lamps and so on, specific can be configured according to user requirements.

Courtyard lights are a kind of outdoor lighting, usually refers to 6 meters below the outdoor road lighting, its main components by: light source, lamp, lamp rod, flange, Garden Lamp base embedded Parts 5 parts, because the courtyard lamp has a variety, aesthetic and decorative features of the environment, so also known as landscape garden lights. Mainly used in urban slow lanes, narrow lanes, residential areas, tourist attractions, parks, squares and other public places outside lighting, can extend people's outdoor activities time, improve the safety of property.

Courtyard Light development so far, according to the use of the environment and design style of different, derived from different types, divided into: European garden lights, modern garden lights, Garden Lamp classical courtyard lights three categories.

The function and characteristic of the lighting system of the courtyard lamp. The main feature of the garden light is the function of directional emission light, because the power-type courtyard lamp is almost equipped with reflectors, and the efficiency of the reflector is obviously higher than that of the luminaire. In addition, the efficiency of the reflector has been included in the light efficiency test of the courtyard lamp. Road lamps with courtyard lights should be used to the extent possible by the directional emission characteristics of the courtyard light.

Courtyard lamp manufacturers make the road lamps in each courtyard light directly to the surface of the road to each area, this time again using the lamp reflector auxiliary matching light, can be used to achieve a very reasonable road lighting integrated light.

Introduction to the selection of courtyard lamps

(1) The use of reasonable light fixtures, Garden Lamp should be based on the lighting site function and space shape to determine the light distribution type.

(2) Select high efficiency lamps. Under the condition of satisfying the glare limit requirement, the direct-type light distribution lamp and the open type luminaire should be used for illumination only satisfying the visual function.

(3) The use of convenient installation and maintenance, Garden Lamp low operating costs of lamps.

(4) in the fire or explosion hazards and dust, damp, vibration and corrosion of the environment of special sites, should be selected to meet the requirements of the environmental lighting.

(5) When the surface of lamps and lanterns are attached to combustible materials, Garden Lamp such as heat insulation, heat dissipation and other fire protection measures should be adopted.

(6) Lighting fixtures should have a complete photoelectric parameters, its performance should meet the relevant provisions of the existing standards.

(7) The appearance of the luminaire should be coordinated with the environment of the installation place.

(8) Consider the characteristics of light source and the requirements of building decoration.

(9) The difference between the courtyard lamp and the street light is not big, Garden Lamp mainly is the height, the material thickness and the esthetic degree difference, the street lamp material thicker, also higher, the appearance courtyard lamp is more beautiful.